Adsorption of mercaptopropionic acid onto Au(1 1 1): Part II. Effect on copper electrodeposition

Copper deposition in the presence of an organic additive (3-mercaptopropionic acid, MPA) was studied by cyclic voltammetry and in situ scanning tunneling microscopy (STM) and the results are compared to those for additive-free solutions. It is shown that underpotential deposition (upd) of copper onto a fully MPA-covered electrode produces a defect-rich substrate, but the defects are blocked by the dense organic film for bulk deposition, resulting in a low number of nuclei. A grain-refining effect of MPA, however, was found, when Cu deposition was initiated shortly after addition of MPA to the solution, i.e., for a low-coverage MPA adlayer.     

Charakterisierung und Störstoffanalyse von rückgewonnenen Stoffströmen aus Wärmedämmverbundsystemen

Due to the growing energy requirements, the proportion of external thermal insulation composite systems (ETICS) installed has increased significantly during the past 50 years. Due to the longevity of these systems, ETICS waste is currently accumulating. Owing to the complex construction as well as a multitude of differently installed materials and substances of the past generations, there are many uncertainties and problems with the clean and low-pollutant processing of such systems. In the frame of this work, the ETICS were processed and sorted before being screened for ingredients or pollutants as well as for the purity of the recovered material fractions.     

Comparing Efficiency per Volume of Uniflow Cyclones and Standard Cyclones

A competitive alternative to the standard reverse flow cyclone for gas-solids separation is the uniflow cyclone. Gas and particles passing through it in only one direction, allowing a cost-effective usage in space limited applications. Comprehensive studies of uniflow cyclones have strongly improved their understanding and led to approved design criteria and calculation methods. Here it is shown that uniflow cyclones can achieve higher efficiencies per volume with a low pressure drop than standard cyclones.     

Optimizing the ring-rolling operation with process control

To minimize costs in the manufacture of ring-shaped products, the ring-rolling process must be controlled efficiently. Toward this end, a recently developed control system allows nearly unattended operation of ring-rolling machines. The control system determines optimum preform geometry, thereby minimizing scrap; it also continuously monitors the process to adjust for deviations from set conditions. Various operations can be controlled, and process efficiency and quality are greatly improved.     

Molecular interaction networks in the analyses of sequence variation and proteomics data

Protein–protein interaction networks are typically generated in standard cell lines or model organisms as it is prohibitively difficult to record large interaction datasets from specific tissues or disease models at a reasonable pace. Although the interaction data are of high confidence, they thus do not reflect in vivo relationships as such. A wealth of physiologically relevant protein information, obtained under different conditions and from different systems, is available including information on genetic variation, protein levels, and PTMs. However, these data are difficult to assess comprehensively because the relationships between the entities remain elusive from the measurements. Here, we exemplarily highlight recent studies that gained deeper insight from genetic variation, protein, and PTM measurements using interaction information pointing toward the importance and potential of interaction networks for the interpretation of sequencing and proteomics data.     

Fiber optic sensing technology for detecting gas hydrate formation and decomposition

A fiber optic-based distributed sensing system (DSS) has been integrated with a large volume (72 l) pressure vessel providing high spatial resolution, time-resolved, 3D measurement of hybrid temperature-strain (TS) values within experimental sediment-gas hydrate systems. Areas of gas hydrate formation (exothermic) and decomposition (endothermic) can be characterized through this proxy by time series analysis of discrete data points collected along the length of optical fibers placed within a sediment system. Data are visualized as an animation of TS values along the length of each fiber over time. Experiments conducted in the Seafloor Process Simulator at Oak Ridge National Laboratory clearly indicate hydrate formation and dissociation events at expected pressure-temperature conditions given the thermodynamics of the CH(4)-H(2)O system. The high spatial resolution achieved with fiber optic technology makes the DSS a useful tool for visualizing time-resolved formation and dissociation of gas hydrates in large-scale sediment experiments.     

Zeolite based trace humidity sensor for high temperature applications in hydrogen atmosphere

We present a humidity sensor based on H-ZSM-5 type zeolite that is suitable to detect traces of humidity (10–110 ppm_V) under harsh conditions, e.g. reducing atmosphere (H₂) and high temperature (up to 600 °C). By means of complex impedance spectroscopy (IS) we show that the zeolite sensor responds linearly towards minimal changes in humidity. Therefore this result indicates that the zeolite sensor is capable to detect traces of humidity in processes where high temperatures in a hydrogen environment are required.     

Immunoglobulin 1 (IgG1) Fc-glycosylation profiling of anti-citrullinated peptide antibodies from human serum

In several autoimmune disorders, including rheumatoid arthritis (RA), autoantibodies are thought to be the driving force of pathogenicity. Glycosylation of the Fc-part of human Igs is known to modulate biological activity. Hitherto, glycosylation of human IgG-Fc has been analyzed predominantly at the level of total serum IgG, revealing reduced galactosylation in RA. Given the pathogenic relevance of autoantibodies in RA, we wished, in the present study, to address the question whether distinct Fc-glycosylation features are observable at the level of antigen-specific IgG subpopulations. For this purpose, we have developed a method for the microscale purification and Fc-glycosylation analysis of anti-citrullinated peptide antibodies (ACPA). ACPA represent a group of autoantibodies that occur with unique specificity in RA patients. Their presence is associated with increased inflammatory disease activity and rapid joint destruction. Results indicate that ACPA of the IgG1 subclass vary considerably from total serum IgG1 with respect to Fc-galactosylation, with galactosylation being higher on ACPA than on serum IgG1 for some patients, while other patients show higher galactosylation on serum IgG1 than on ACPA. Using this method, studies can be performed on the biological and clinical relevance of ACPA glycosylation within RA patient cohorts.     

Precise selective deposition of microparticles on electrodes of microelectronic chips

We examined the high precision deposition of toner and polymer microparticles with a typical size of approximately 10 microm on electrode arrays with electrodes of 100 microm and below using custom-made microelectronic chips. Selective desorption of redundant particles was employed to obtain a given particle pattern from preadsorbed particle layers. Microparticle desorption was regulated by dielectrophoretic attracting forces generated by individual pixel electrodes, tangential detaching forces of an air flow, and adhesion forces on the microchip surface. A theoretical consideration of the acting forces showed that without pixel voltage, the tangential force applied for particle detachment exceeded the particle adhesion force. When the pixel voltage was switched on, however, the sum of attracting forces was larger than the tangential detaching force, which was crucial for desorption efficiency. In our experiments, appropriately large dielectrophoretic forces were achieved by applying high voltages of up to 100 V on the pixel electrodes. In addition, electrode geometries on the chip's surface as well as particle size influenced the desorption quality. We further demonstrated the compatibility of this procedure to complementary metal oxide semiconductor chip technology, which should allow for an easy technical implementation with respect to high-resolution microparticle deposition.